专业的解决方案助你成功 Professional Solutions For Success
首页 > 瓷砖辅材系统 > 填缝材料系统 > HENRY 188

产品图片和视频

HENRY 188 水性环氧填缝剂

●水性环保
●耐温性能好,粘结力强
●耐污、抗菌防霉,易擦洗
●低温环境下可自然养护,物理性能优异

 

 

产品描述:

HENRY 188水性环氧填缝剂是由环氧树脂、固化剂、耐化学腐蚀的彩砂骨料组成的双剂型填充式美缝材料,结合了传统环氧填缝剂的技术性能以及水泥基填缝剂的施工便利性,适用于各种瓷砖、地砖、石材等填缝和美缝。

 

产品特点:

●水性环保;

●耐温性能好,粘结力强;

●耐污、抗菌防霉,易擦洗;

●低温环境下可自然养护,物理性能优异。

 

施工方法:

1、打开包装,将A组分和B组分倒入搅拌桶中,采用手工搅拌或使用低速(<300 RPM)搅拌器将液体彻底混合均匀。手动搅拌或用低速电动搅拌器彻底混合均匀(约3分钟)

2、选择正确的橡皮刮板将填缝剂斜向填入砖缝并压实。

3、常温下填缝完毕后约20-30分钟左右开始进行第一次清洗。用湿海绵清除瓷砖上多余的填缝剂,再过1小时后,再用清水清洗擦亮瓷砖表面。

4、填缝后24小时内要避免雨淋、水冲,地面上避免行走。

 

注意事项:施工温度应在5-35℃之间。施工完毕后及时清洗工具,不慎入眼,应用大量清水冲洗,并及时就医。

 

执行标准:JC/T 1004-2017 RGⅡ型

 

储存运输:本品须存放于干燥、通风的室内环境,防潮、防水、防止暴晒,保质期为12个月。

 

包装:2KG/桶,5KG/桶

 

 

 

HENRY 188 Water-Based Epoxy Grout 

Product description:

Henry 188 is a water-based epoxy grout, consisting of epoxy resin, hardener and chemical resistant colored sand aggregate. It’s a two-component filling grout decoration material and combines the technical performance of traditional epoxy grout and good workability of cement grout. This product is suitable for different wall and floor tiles, stones as the grout material in industrial and residential buildings.

 

Features:

Excellent chemical resistance

Be able to cure in low temperature

Resistant to humidity

High strengths

Mould resistant

Water washable during application

Fast curing and low maintenance period

 

Application:

1. Open the package, mix part A and part B with low speed mixer(<300 RPM) or hand mixer in the bucket until it stirs thoroughly. The mixing takes about 3 minutes.

2. Select the proper rubber float to fill the mixed material into the joints.

3. Under normal temperature, conduct the first cleaning about 20-30 minutes after the grouting application. Use the sponge to clean up the excess material on the tile surface. Then after another 1 hour, clean the tile surface with clean water until the residue is removed.

4. Within 24 hours after the grouting application, essential protection measures should be taken to avoid rain, water flooding and foot and other traffic on the floor.

 

Notes:

The working temperature is between 5-35℃. Thorough cleaning is required right after the grouting application to ensure the final tile appearance. In case the material gets into the eyes accidentally, flush with plenty of clean water and seek medical advice promptly.

 

Standard:

The product conforms to JCT1004-2017 RG II.

 

Storage and transportation:

This product must be stored indoors at 5℃-35℃ to prevent frost and direct sunlight exposure. Shelf life is 12 months.

 

Package:

2kg/barrl,5kg//barrel