特点：

● 水性乳液，环保

● 封底、降低基层吸收性 

● 粘接架桥作用，增强界面附着力

 

用途：

● 用于吸收性基层的界面处理。

 

基层处理：

● 基层应坚硬、平整、干燥、洁净、无裂缝、无油脂、无脱膜剂。如基层表面疏松或大面积浮浆，宜喷丸处理。底涂前砂磨基层并用吸尘器清理。

 

技术参数：

● 颜色：     乳白色

● 状态：     液态

● 固含量：    ≥17%

● 密度：     1.0kg/L

● 单耗：     约100-150g/m²

● 风干时间： 水泥地坪或混凝土基层，2-4小时，实际应用时间根据现场温度和相对空气湿度进行调整。

 

适用基层：

● 乳液型界面处理剂，用于墙地面吸收性基层如混凝土、水泥砂浆、石膏基层的底涂，即封闭基层的毛细孔和缝隙，降低多孔性基层的吸收性；同时增强基层的界面附着力，起粘接桥的作用。经底涂后的基层可以进行亨历自流平找平层的施工。

 

施工方法：

● 水泥砂浆地坪的界面处理用HENRY509按1:0.5兑水稀释后用羊毛滚筒充分滚涂。对高吸收性基层须滚涂两遍。工具和容器可以用水清洗。

 

注意事项：

● HENRY509水性界面剂适合在5℃到35℃的气温下使用。本说明书提供的数据是在23℃±2℃和50-55%的相对湿度下取得的。请注意，在其它气候环境，干燥成膜的时间会相应延长或缩短。

 

包装与储存：

● 20kg塑料桶包装。本品须存放于室内5℃-35℃，防止冰冻、曝晒。保质期为12个月。

 

 

Features:

Aqueous polymer emulsion ;

Back Cover , reduce subfloor absorbent ;

Bonding bridging role in enhancing interfacial adhesion.

 

Uses:

Interface treatment for an absorbent base.

 

Applicable Subfloor :

Emulsion primer treatment for wall and floor absorbent subfloor such as concrete, cement mortar , anhydrite subfloor primer, which closed the pores and cracks subfloor, subfloor lower porous absorbent; while enhancing the interfacial adhesion subfloorsubfloor , acts as an adhesive bridge. By subfloor primer can be constructed after HENRY self-leveling layer.

 

Primary Treatment:

Subfloor should be hard, smooth, dry, clean, no cracks , no fat , no release agent. If a large area of ​​subfloor or loose surface laitance, should peening. Subfloor primer before sanding and use a vacuum cleaner to clean up.

 

Technical Parameters:

Color :              White

State:               Liquid

Solid Content : ≥ 17%

Density :          1.0kg / L

Consumption :  About 100-150g/㎡

Drying Time :   Cement floor or concrete base , 2-4 hours, practical application according to the sitetemperature and relative air humidity adjustment.

 

Construction Method:

Cement mortar floor interface treatment by HENRY 509 1:0.5 watered sufficiently diluted with wool drum roll. Subfloor required for highly absorbent roll twice, you do not need watered concrete floor directly roll . Tools and containers can be cleaned with water.

 

Note:

HENRY 509 Water-based Primer only suitable for use at temperatures of 5 ℃ to 35 ℃. Data provided in this manual is at 23 ℃ ± 2 ℃ and 50-55 % relative humidity achieved. Please note that in other climates , the curing time will be extended or shortened.

 

Packaging and Storage:

20kg plastic pails. The product shall be kept at room 5 ℃ -35 ℃, prevent freezing, exposure. Shelf life is 12 months.